Why is my Zibro P 129 remote control not working?
- JJeffery KingAug 3, 2025
If your Zibro Air Conditioner remote control isn't working, ensure it's aimed correctly at the control panel. If that doesn't solve it, replace the batteries.
Why is my Zibro P 129 remote control not working?
If your Zibro Air Conditioner remote control isn't working, ensure it's aimed correctly at the control panel. If that doesn't solve it, replace the batteries.
What to do if my Zibro P 129 is not cooling properly?
If your Zibro Air Conditioner isn't performing as expected, several factors could be the cause. Check if the unit is in direct sunlight and close the curtains. Ensure that windows and doors are closed, especially if there are many people or a heat source in the room; consider adding another air conditioner. Inspect the filter; a dirty filter should be cleaned or replaced. Make sure that neither the air inlet nor the air outlet is blocked. Finally, verify that the room temperature isn't lower than the temperature you've set on the unit; if it is, adjust the temperature selection accordingly.
How to reset the compressor on my Zibro P 129?
If your Zibro Air Conditioner's compressor isn't working, overheat protection has likely been activated. Wait 3 minutes for the temperature to decrease, then turn the unit on again.
Type | Portable Air Conditioner |
---|---|
Cooling power | 12000 BTU/h |
EER | 2.6 |
Air flow (high speed) | 380 m³/h |
Refrigerant | R410A |
Energy Efficiency Ratio (Cooling) | 2.6 |
Air Flow (High) | 380 m³/h |
Power Supply | 220-240V/50Hz |
Noise Level (Indoor) | 52 dB |
Dimensions (Indoor Unit) | 466 x 397 x 765 mm |
Operating Temperature (Cooling) | 16-35°C |
Operating Temperature (Heating) | 5°C - 30°C |
Essential safety guidelines for operating the air conditioner.
Detailed list and description of all main parts of the air conditioner.
Critical safety points for installation and operation.
Steps for safe electrical connection and general electrical precautions.
Mandatory waiting period before first use.
Step-by-step guide to install air filters correctly.
Guidance on unsuitable locations for operation.
Proper positioning of the exhaust hose for optimal air circulation.
How to start the unit and switch between cooling, fan, and dehumidify modes.
Adjusting fan speed and temperature in cooling mode.
Specifics for dehumidifier use and air circulation without cooling.
How to schedule the unit's on/off times.
Overview of remote control functions and operating range.
Instructions for setting desired shut-off or start times.
Understanding indicator lights and compressor behavior in dehumidifier mode.
Description of screen, HAF, and active carbon filters.
Procedure for cleaning and recommended replacement intervals.
Key advice on using and replacing air conditioner filters.
How to manually adjust the horizontal louvres.
Procedure for manually draining the unit's water tank.
Connecting a hose for automatic water removal.
Using a drain tube for efficient water removal in dehumidifier mode.
Instructions for cleaning the unit and general filter maintenance.
Steps to prepare and store the unit safely during off-season.
Guide to diagnose and resolve typical operational issues.
Details of the 24-month warranty coverage and requirements.
Detailed technical data and specifications for both models.
Information on refrigerants, GWP, and recycling advice.