4
67
B INSTALLATION
This unit is portable and can easily be moved from one room to another. In doing
so keep this in mind:
Ensure that the unit is positioned upright and on a level surface.
Place the loose filters in the filter holder.
• Take the filter holder 5 out of the air conditioner
•
Open the filter holder and place the 3M
TM
HAF filter in the filter holder
5.
•
Place the filter fixing component back in the holder.
• Place the filter holder back in the air conditioner.
Do not operate the unit inside the bathroom, shower, or in any other very
humid environment.
Please keep a distance of 50 cm between the unit and the wall or other
objects to ensure proper air circulation.
Insert both ends of the air exhaust hose J in the round connectors 9. Fasten
the connectors by turning them clockwise onto the hose.
Insert one round connector 9 in the backside of the unit 7. Fasten the other
connector 9 to the window air outlet K.
Ensure that the window air outlet K has a free flow outside. Close the
window or door as much as possible to prevent outside air from entering the
room.
G
WARNING
Before using the air conditioner it should be left in an upright position
for at least 2 hours.
G
ATTENTION!
• Never use the device with a damaged power cord, plug, cabinet or
control panel. Never trap the power cord or allow it to come into
contact with sharp edges.
• Never seal the room - where this device will be used - completely
airtight. This will prevent under pressure in this room. Under
pressure can disrupt the safe operation of geysers, ventilation
systems, ovens, etc.
• Failing to follow the instructions may lead to nullification of the
guarantee on this device.
man_P28_1 22-02-2008 15:42 Pagina 67
To Next Page
Loading...
