4
63
B INSTALLATION
This unit is portable and can easily be moved from one room to another. In doing
so keep this in mind:
Ensure that the unit is positioned upright and on a level surface.
Place the loose filters in the filter holder.
• Take the filter holder out of the air conditioner
• Open the filter holder and place the active carbon filter (black) and 3M
TM
Filtrete
TM
filter (white) in the filter holder.
• Place the filter fixing component back in the holder.
• Place the filter holder back in the air conditioner.
Do not operate the unit inside the bathroom, shower, or in any other very
humid environment.
Please keep a distance of 50 cm between the unit and the wall or other
objects to ensur
e proper air circulation.
Connect the hose
K to the unit by turning it clockwise (at least 5 turns).
Connect the hose
K to the slidebar connector P as far as possible.
G
WARNING
Before using the air conditioner it should be left in an upright position
for at least 2 hours.
G
WARNING
Don’t lift, or move by pushing, the air conditioner at the back side, but
always at the front side (see pictures).
G
ATTENTION!
• Never use the device with a damaged power cord, plug, cabinet or
control panel. Never trap the power cord or allow it to come into
contact with sharp edges.
• Never seal the room - where this device will be used - completely
airtight. This will prevent under pressure in this room. Under
pressure can disrupt the safe operation of geysers, ventilation
systems, ovens, etc.
• Failing to follow the instructions may lead to nullification of the
guarantee on this device.
To Next Page
