EasyManua.ls Logo

Zibro P 820 - Installation Guide

Zibro P 820
18 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
63
B
I N S TA L L AT I O N
This unit is portable and can easily be moved from one room to another. In doing
so keep this in mind:
Ensure that the unit is positioned upright and on a level surface.
Place the loose filters in the filter holder.
Take the filter holder out of the air conditioner
Open the filter holder and place the active carbon filter (black) and 3M
T M
Filtrete
TM
filter (white) in the filter holder.
Place the filter fixing component back in the holder.
Place the filter holder back in the air conditioner.
Do not operate the unit inside the bathroom, shower, or in any other very
humid environment.
Please keep a distance of 50 cm between the unit and the wall or other
objects to ensure proper air circulation.
Connect the hose K to the unit by turning it clockwise (at least 5 turns).
Connect the hose K in the slidebar connector P as far as possible.
WA R N I N G
Before using the air conditioner it should be left in an upright position
for at least 2 hours.
WA R N I N G
Don’t lift, or move by pushing, the air conditioner at the back side, but
always at the front side (see pictures).
AT T E N T I O N !
Never use the device with a damaged power cord, plug, cabinet or
control panel. Never trap the power cord or allow it to come into
contact with sharp edges.
Never seal the room - where this device will be used - completely
airtight. This will prevent under pressure in this room. Under
pressure can disrupt the safe operation of geysers, ventilation
systems, ovens, etc.
Failing to follow the instructions may lead to nullification of the
guarantee on this device.

Related product manuals