Need help?Do you have a question about the Zibro S1026 and is the answer not in the manual?
Key safety warnings and recommendations for device connection and use.
General precautions for safe operation and handling of the air conditioner.
Lists and identifies components of the indoor air conditioner unit.
Lists and identifies components of the outdoor air conditioner unit.
Explains the meaning of various indicators on the indoor unit's display panel.
Advises on operating conditions and humidity for optimal performance and condensation prevention.
Warns about the sequence of operation modes and forced cool mode usage.
Provides tips for effective remote control usage, including aiming and distance.
Details the functions of each button on the air conditioner's remote control.
Explains indicators on the remote controller's display panel.
Details the display panel of the remote controller and its indicators.
Clarifies that figures show relative functions, not exact displays.
Instructions for installing and replacing batteries in the remote control.
Important notes regarding battery usage and remote controller lifespan.
Steps to operate the air conditioner in automatic mode using the remote.
How to manually select cooling, heating, or fan-only modes via remote.
Instructions for operating the air conditioner in dry mode using the remote.
How to set the timer for automatic on and off operations using the remote.
Provides tips for achieving optimal performance, including airflow and temperature settings.
Critical warnings regarding remote controller care and handling.
How to adjust the horizontal louvers for optimal air direction.
Manual adjustment of vertical louvers for left-right air direction.
Warning to avoid touching the fan behind the vertical louvers.
Steps to enable and stop automatic swinging of the air flow direction.
Explains how the unit automatically selects modes based on temperature.
Describes the economic operation when using the SLEEP button for temperature adjustment.
Details how the dehumidifying mode functions and its effect on room humidity.
Emphasizes the need to disconnect power before cleaning the unit.
Instructions for cleaning the main unit and the remote control.
Steps to clean the air filter for optimal efficiency.
Warning about touching the electrostatic plasma filter due to electric shock risk.
Procedures for preparing the unit for extended periods of non-use.
Essential checks to perform before operating the air conditioner.
Safety precautions related to handling internal parts and cleaning.
Covers compressor protection, anti-cold air, and defrosting mechanisms.
Explains the cause of white mist during cooling or defrosting operations.
Describes common operational sounds like hissing and squeaking.
Explains dust emission after periods of non-use or initial operation.
Discusses causes of unusual smells originating from the indoor unit.
Explains when the unit switches to fan-only mode from cooling or heating.
Addresses condensation and dripping water during high humidity cooling.
Discusses heating efficiency at low outdoor temperatures and supplementary heating.
Describes the unit's ability to resume operation after a power failure.
Lists common faults, error codes, and corresponding solutions for the air conditioner.
Advises contacting a supplier or authorized engineer for unresolved issues.
Outlines the 24-month guarantee, coverage, and exclusions for the air conditioner.
Detailed technical specifications for models S1026 and S1034.
General| Type | Split Air Conditioner |
|---|---|
| Cooling power | 2.6 kW |
| Cooling Capacity | 9000 BTU/h |
| Refrigerant | R410A |
| Weight (Indoor Unit) | 8.5 kg |
To Next Page
