Need help?Do you have a question about the Zibro S1825 and is the answer not in the manual?
Identifies components of the indoor air conditioning unit.
Identifies components of the outdoor air conditioning unit.
Explains the buttons and functions of the remote control.
Details the indicators displayed on the remote control.
Explains the different areas and indicators on the remote's display panel.
Guides on how to install or replace batteries in the remote control.
Explains how to operate the air conditioner in automatic mode using the remote.
Details manual operation modes like cooling, heating, and fan-only.
Explains the steps for operating the air conditioner in dehumidifying (dry) mode.
Describes how to set the timer for auto-on and auto-off functions.
Explains how to adjust the horizontal louvers for airflow direction.
Instructions for setting the horizontal airflow direction using the remote.
How to manually adjust the vertical louvers for airflow.
Instructions for enabling automatic vertical swing of airflow.
Explains how automatic mode selects cooling, heating, or fan operation.
Describes the economic operation mode (SLEEP mode) for energy saving.
Details how the unit operates in dehumidifying mode.
Instructions for cleaning the indoor unit and remote control.
Steps for cleaning the air filter to maintain efficiency.
Important checks to perform before operating the air conditioner.
Explains protective features like compressor restart delay and anti-cold air.
Describes the automatic defrosting process and its indications.
Explains the cause and occurrence of white mist from the indoor unit.
Addresses normal operational noises like hissing and squeaking sounds.
Explains dust emission after long periods of non-use or first use.
Addresses unusual smells originating from the indoor unit.
Explains why the unit switches to fan-only mode after reaching set temperature.
Addresses condensation on the indoor unit in high humidity and how to mitigate it.
Explains heat absorption and potential need for supplementary heating.
Describes the auto-restart feature after power interruption.
Lists common problems, their causes, and solutions.
Addresses issues when the unit fails to power on.
Troubleshoots poor cooling/heating performance despite airflow.
Explains why fan speed may not be adjustable in certain modes.
Explains situations where the temperature indicator is not displayed.
General| Cooling capacity | 1.8 kW |
|---|---|
| Energy efficiency class cooling | A |
| Dehumidifying capacity | 1.2 l/h |
| Noise level | 64 dB |
| Refrigerant | R290 |
| Timer | Yes |
| Power Supply | 220-240 V, 50 Hz |
| Type | Mobile air conditioner |
| Timer duration | 24 hours |
To Next Page
