What to do if all displays remain constantly off on ZIEHL-ABEGG UNIcon?
If all displays on your ZIEHL-ABEGG Desktop remain constantly off, it could be due to a device defect, requiring a replacement. Alternatively, the fuse might be defective, in which case you should check and replace it if necessary. Another potential cause is that the display line is not properly plugged in, so you should check the plug-in connections.
Why does my ZIEHL-ABEGG Desktop display 'Overtemp'?
If your ZIEHL-ABEGG Desktop shows an 'Overtemp' error, it could be because the room temperature is above the set maximum. Check the room temperature to ensure it is within the acceptable range. Also, an interruption of the sensor lead to input 'E1' could be the cause. In this case, check both the set maximum temperature and the sensor lead and its connection.
What to do if ZIEHL-ABEGG UNIcon Desktop shows 'Undertemp'?
If your ZIEHL-ABEGG Desktop displays 'Undertemp', it means the room temperature is below the set minimum. Verify the room temperature and the set minimum temperature.
How to fix 'EEPROM' error on ZIEHL-ABEGG Desktop?
If your ZIEHL-ABEGG Desktop shows 'EEPROM', it indicates a damaged parameter memory. Unfortunately, this cannot be fixed, and the device needs to be replaced.
General| Brand | ZIEHL-ABEGG |
|---|---|
| Model | UNIcon |
| Category | Desktop |
| Language | English |
To Next Page
