ZiLOG System 8000

USER
22
Zilog
USER
SIOPORT
TEST
ZBOOT
<port address> [WIB]
SIO port read/write
Enter Test Mode
[DIT]
Read a 5l2-byte program from disk or
tape and execute
NOTE
All outputs in Monitor Mode can be suspended with
XOFF (%13) control-s and resumed with XON "(%11)
control-q.
COklMAND DESCRIPTIONS
DISPLAY
Syntax
DISPLAY <address> <# of long words/words/bytes> [LIWIB]
Description
This command displays at the terminal the contents of speci-
fied memory locations starting at the given address, for
the given number of bytes.
If the LlwlB parameter is specified, the contents of the
memory locations are displayed in hex notation and as ASCII
characters.
If the LlwlB parameter is not specified, the memory loca-
tions are displayed one at a time, with an opportunity to
change the contents of each location. For each location,
the address is displayed, followed by the contents of LlwlB
and a space. To change the co~tents at a given location,
enter the new contents in the form long wordlwordlbyte. If
RETURN is pressed, either alone or after the new contents,
the next sequential location is displayed. Entering a "Q"
(for QUIT), followed by a RETURN terminates the command.
Example
Display memory starting at %5200 for ten words.
< D. .5..2.rul lJ! ( CR) > .
<00> 5200 1808 FE2B 2004 D923 7ED9 CD35 2238 OAED
* ... + •• # ••• 5"8 •• *
<00> 5208 6F23 ED6F 2BIE 0118 EDD9 2218 14D9 5778
*0# .0+ ••• H ••• Wx*
Zilog
22