Zimmer Cryo 7 - Page 42

Manufacturer’s EMC declaration
16
Page 32
Single phase: at 0°
Single phase: at 0°
When the user of the Cryo 7
device needs further operation
even in the case of interruptions
in the power supply, it is
recommended to operate the
Cryo 7 device from an
uninterruptible power supply or a
battery.
Voltage interruptions
according to IEC 61000-4-11
0% UT; 250/300 cycles
0% UT; 250/300 cycles
Magnetic field at power
supply frequency (50/60 Hz)
according to IEC 61000-4-8
30 A/m
50 Hz or 60 Hz
30 A/m
50 Hz
Magnetic fields at mains
frequency should correspond to
the typical values found in
business or hospital
environments.
Note: U
T
is the a.c. supply voltage prior to application of the test level.