Step 2. Unfold component 1 as above .
Step 1. Pull all components out of the box and lay them out on floor.
Step 3. Turn 90˚ just like above picture shows , so that the leg can stand on
the floor.
Step 4. Unfold other legs on component 1.
Step 5. Unfold component 2 as the above picture shows .
Step 6. Unfold other legs on component 2.
Step 7. Connect components 1&2 as shown , to form A .
Step 8. Unfold component 3&4, and conect them to A.
Smart Bed Frame Instructions
for Queen/King Size
1 2
3
4
5
6
A
To Next Page
Need help?
General
