Figure 3. Assemble the rear wheels by folding out the rear legs securing the rear wheels to the
mainframe by either screwing the pin or securing into place the provided bolt.
Figure 4. Open the seat to your rollator walker by pushing
down on both sides of the seat as shown. When you hear a
click from both sides the seat has snapped into place.
Setting The Proper Height
Make sure it your rollator walker seat is fully open and locked
securely in place making the frame rigid.
1. Stand upright with your arms resting at your sides. Adjust
the rollator so that the textured grips are at wrist height.
2. To adjust the height of the rollator, press the spring button
located on each side of the rollator. Ensure that the height
is locked.
3. Your elbows should be bent slightly when griping the grip
at 15-20 degrees.
Brake Operation & Adjustment
• Squeeze both brake handles to slow the rollator walker.
• Pushing down on each brake handle will lock the rear
wheels.