Zip'r Rambler - User Manual

The Zip'r Rambler is a rollator walker designed to provide mobility assistance for individuals who are limited to a seated position but have the capacity to operate a rollator walker. It can be used both indoors and outdoors on flat surfaces.

Function Description:

The primary function of the Zip'r Rambler is to aid users in walking by providing stability and support. It features a seat for resting, brakes for slowing and locking the wheels, and a storage bag for personal items. The rollator is designed for use by a single individual with a maximum weight capacity of 300 lbs. Users should possess the necessary physical, visual, and cognitive skills to operate the rollator safely. If there is any doubt, consulting a dealer or prescriber is recommended.

Important Technical Specifications:

• Maximum Weight Capacity: 300 lbs.
• Wheels: 8-inch smooth glide wheels.
• Brakes: Hand-operated brakes with a locking mechanism.
• Height Adjustment: Adjustable height control for the handgrips.
• Storage: Removable storage bag.
• Additional Features: Backrest, seat, textured handgrips, cane holder.

Usage Features:

• Assembly: The rollator walker comes folded in its packaging. Assembly involves unfolding the rollator, securing the front wheels with fastening knobs, and assembling the rear wheels by folding out the rear legs and securing them to the mainframe with a pin or bolt. The seat is opened by pushing down on both sides until it clicks into place.
• Setting the Proper Height: To ensure proper use, the rollator walker seat must be fully open and locked. The user should stand upright with arms resting at their sides, and the rollator should be adjusted so that the textured grips are at wrist height. Height adjustment is done by pressing the spring button on each side of the rollator. The user's elbows should be slightly bent (15-20 degrees) when gripping the handles.
• Brake Operation: Squeezing both brake handles slows the rollator walker. Pushing down on each brake handle locks the rear wheels, preventing the rollator from sliding, which is a mandatory action before sitting on the seat.
• Brake Adjustment: Brake tension can be increased or decreased by turning an adjustment screw. Turning the screw counterclockwise increases tension, and clockwise decreases tension. The adjustment is then locked by turning a locking nut clockwise. A warning is provided that low brake adjustment tension may cause the rollator to move even when locked.
• Safety Precautions:
  • Always read and understand the owner's manual before operating.
  • Perform a pre-ride safety check before each use, ensuring the rollator is fully unfolded and locked, castor wheels are secured, brakes operate properly, and tires are not damaged or excessively worn.
  • Do not use strong corrosive cleaners on the product surface.
  • Do not leave the rollator walker outside in rainy conditions.
  • Do not hang weighted items on any part of the frame, as this may cause instability.
  • Do not apply rubber conditioner on tire treads, as it can make them dangerously slippery.
  • Do not use rubber or vinyl conditioner on the seat or backrest, as it can make surfaces dangerously slippery, leading to personal injury or damage.

Maintenance Features:

• Daily Maintenance:
  • Store the rollator in a warm and dry climate-controlled environment.
  • Always lock the brakes when getting on and off the scooter to ensure stability and prevent rolling away.
• Cleaning:
  • The rollator is made of durable metals and ABS plastic.
  • It can be cleaned with a damp towel.
  • A damp cloth can also be used to clean the seat and backrest, ensuring they are dry before use.
• General Maintenance:
  • Keep the rollator walker stored indoors to prevent moisture and rust.
  • Regularly check tires for wear and replace if worn.
  • Do not use a water hose or power sprayer to clean the rollator.
  • Ensure all nuts and bolts are tight.
  • Regularly check brake cables and contact Zip'r if worn.

Warranty Information:

• Registration: Customers must register their product on Zipr.com within 30 days of purchase for the warranty to be valid. Failure to register voids the warranty.
• One-Year Limited Warranty: Covers structural frame components, including the platform, fork, and frame, for one year. Zip'r will replace defective parts.
• Service: Customers are responsible for contacting their own Repair/Service Technicians for mechanical work. Zip'r provides warranty items directly to customers or their technicians. A list of recommended technicians can be obtained by emailing service@zipr.com.
• Returns: Returns to providers or Zip'r Mobility without prior authorization are not accepted.
• Warranty Exclusions (Wearable Components): Brake pads, brake cables, tires & wheels, brake levers, seats, storage bags, and backrests are not warranted.
• Other Exclusions: Repairs/modifications without Zip'r Mobility's consent, circumstances beyond Zip'r Mobility's control, labor service calls, and shipping costs are not covered.
• Implied Warranties: Limited to one year from the date of original purchase.
• Claims: All warranty claims require proof of purchase, order number, and product serial number. The warranty is valid only for products purchased, registered within 30 days, and shipped within the continental USA.