The Zippity Oceanside Outdoor Vinyl Shower Kit (ZP19024) is a freestanding outdoor enclosure designed to provide privacy for showering outdoors. It features a durable vinyl construction and a slatted roof design, offering both functionality and aesthetic appeal for outdoor living spaces.
Function Description:
The primary function of this product is to create a private outdoor showering area. It is designed to be a standalone structure, suitable for installation in various outdoor settings such as backyards, pool areas, or near beaches. The enclosure provides privacy with its solid lower panels and allows for natural light and air circulation through its slatted upper design. It includes provisions for installing a shower rod and shade slats, enhancing its utility as a shower enclosure.
Important Technical Specifications:
The shower kit has the following approximate dimensions:
- Overall Height: 88 3/4 inches
- Overall Width (Top View): 48 1/8 inches
- Overall Depth (Top View): 35 5/8 inches
- Enclosure Footprint (Front View): 42 1/8 inches (width) x 35 1/4 inches (depth)
- Enclosure Footprint (Side View): 39 1/8 inches (width) x 35 1/8 inches (depth)
- Panel Height: 77 inches (from ground to top of solid panel)
- Internal Height (to bottom of beams): Approximately 80 inches
- Internal Width (between posts): Approximately 37 1/8 inches
- Internal Depth (between posts): Approximately 35 5/8 inches
- Privacy Board Dimensions: 1/2 inch x 11 inches x 56 3/8 inches
- U-Channel Dimensions: 5/8 inch x 1 1/2 inches x 53 inches
- Beam Dimensions: 1 1/2 inches x 4 1/2 inches x 48 inches
- Horizontal Rail Dimensions: 1 1/2 inches x 4 1/2 inches x 34 3/8 inches
- Shower Rod Dimensions: 5/8 inch x 1 1/2 inches x 41 3/8 inches
- Post Dimensions: 2 inches x 3 1/2 inches x 87 3/8 inches
- Approximate Assembly and Installation Time: 5 hours
- Materials: Vinyl components, stainless steel screws.
Usage Features:
- Privacy: The design incorporates solid privacy boards in the lower sections of the walls, ensuring discretion during use.
- Open Top Design: The slatted roof, formed by shade slats, allows for natural light and ventilation, preventing the enclosure from feeling confined.
- Shower Rod Inclusion: The kit includes two shower rods, allowing users to hang a shower curtain (not included) for additional privacy or to contain water spray.
- Versatile Mounting Options: The kit supports two primary installation methods:
- Surface Mount: For wood or concrete surfaces, using Zippity Surface Mounts (ZP19011) and either 1/4" x 3" concrete wedge anchors or 1/4" x 4" hex head bolts with nuts and washers (all sold separately).
- In-Ground Installation: For soft ground, using Zippity Post Extensions (ZP19012) and 80 lb concrete mix (both sold separately).
- Modular Assembly: The design allows for the assembly of individual side panels before combining them, simplifying the construction process.
- Easy Assembly: The instructions emphasize that excessive force should not be needed during assembly, suggesting a user-friendly design. Pre-drilled holes guide screw placement.
- Aesthetic Appeal: The vinyl construction and slatted roof provide a clean, modern look that can complement various outdoor decors.
Maintenance Features:
- Durable Vinyl Construction: Vinyl is known for its low maintenance requirements, resistance to rot, insects, and weathering, making it suitable for outdoor use.
- Stainless Steel Hardware: The use of stainless steel screws helps prevent rust and corrosion, extending the lifespan of the fasteners in outdoor conditions.
- Vinyl Weld Glue: The inclusion of vinyl weld glue for decorative end caps suggests a secure and lasting attachment for these components, reducing the need for frequent re-attachment.
- Easy Cleaning: Vinyl surfaces are generally easy to clean with soap and water, requiring minimal effort to maintain their appearance.
- Replacement Parts Availability: The manufacturer provides contact information for ordering replacement parts, ensuring that damaged or missing components can be easily acquired, contributing to the long-term usability of the product.
- Customer Support: The availability of customer service via phone and email for assembly help and missing/damaged parts further supports product maintenance and longevity.
To Next Page
Need help?
General
