11
EN
and should not be thrown away with household waste. Dispose of them
in an appropriate battery recycling centre.
ENVIRONMENT
The device is delivered in a package to protect it against any possible
transport damage. The packaging is made from non-processed
material and can be recycled. Throw the materials to appropriate
colour containers for selective waste collection.
Protect the environment and do not throw used batteries into
household wastes. Return them to the point of sale or a special
recycling centre.
Used electrical equipment (including the computer and power supply)
are recyclable. Do not throw them out with household waste as they
may contain substances dangerous to the health and environment. You
can actively contribute to sustainable use of natural resources and the
protection of the natural environment by handing the used device to
a recycling centre for used electrical devices.
ASSEMBLY
The device must be assembled carefully by an adult. In case of doubt,
ask a more experienced person for help.
Prior to the assembly, make sure the set contains all
the listed elements and whether none of the parts was damaged
during transport. If any parts are missing or you have any other
reservations, contact the seller.
Have a look at the drawings and explanations and follow the
assembly manual when assembling the device.
Be careful during the assembly. There is a risk of injury when
using the tools and parts.
Remember to keep your surroundings safe. Do not let tools and
parts lie around in chaos. Remember that plastic foil and bags
pose o suffocation risk to small children.
Assembly parts necessary for a specific step in
the assembly manual are shown in pictures and included in
instructions. Use the elements indicated in the assembly
manual.
Do not tighten parts completely during the first stages
of the assembly. Tighten connections after all parts are placed
and fitted properly.
The manufacturer may have assembled some parts.
ASSEMBLY DIAGRAM (→ See page 2)
ATTENTION! Do not use parts other than those provided by the manufacturer.
PARTS LIST
No. Description Quantity No. Description Quantity
1
Main frame 1
25
Resistance adjustment knob 1
2
Front base 1
26
Handlebar foam 2
3
Rear base 1
27
Steering wheel 1
4
Rear base levelling pad 2
28
Heart rate measurement cable 1
5
Bolt m8xl74 4
29
Saddle height knob 1
6
Curved washer Φ8.5x1.5x φ25xr33.5 8
30
Separator 1
7
Nut M8 1
31
Flat washer D13xd8x1,5 1
8
Crank 1
32
Handlebar cover 1
9 L/R
Left/right pedal 1/1
33
Saddle 1
10
Front base cap 2
34
Saddle horizontal position guide 1
11
Computer cable 1
35
Saddle guide cap 2
12
Resistance adjustment cable 1
36
Saddle column 1
13
Connecting cable 1
37
U-bracket for horizontal saddle positioning 1
14
Internal hexagonal bolt m8x16 4
38
Flat washer d10 1
15
Saddle height adjustment sleeve 1
39
Saddle horizontal position knob 1
16
Handlebar angle adjustment handle 1
40
Handlebar cover 1
17
Handlebar column 1
41
Saddle 1
18
Front handlebar column cover 1
42
Saddle horizontal position guide 1
19
Flat washer 1
43
Water bottle 1
20
Cross-head bolt 1
44
Water bottle holder 1
21
Cross-head bolt m4x10 4
45
Screw 2
22
Handlebar column cover 1
46
Flat washer 2
23
Handlebar cap 2
47
Towel holder 1
24
Computer 1
ASSEMBLY MANUAL
CAUTION! Follow the steps below during the assembly and use tools supplied with the product.
Prepare sufficient space for the assembly operation.
It is advisable to assemble the product with another person because of the weight of some elements.
1. Install the front and rear base
Fix the rear (3) and front base (2) to the main frame (1) using bolts (5), curved
washers (6), and nuts (7).
ATTENTION! Remove any plastic or cardboard safety inserts before assembly.
To Next Page
Loading...
