Zipro Flame - User Manual

Questions and Answers

T
Tyler CunninghamJul 27, 2025
What to do if my Zipro Fitness Equipment lacks appropriate resistance?
- S
  Stacey OdonnellJul 28, 2025
  If you experience a lack of appropriate resistance during training on your Zipro Fitness Equipment, it might be due to a few reasons. First, check if the resistance adjustment cable is connected correctly, referring to the assembly manual for guidance. If the issue persists, it may be due to a loose drive belt, increased distance between the flywheel and magnets, or a damaged voltage regulator, in which case you should contact the manufacturer’s service or customer service.
S
Susan FreemanAug 1, 2025
What to do if my Zipro Flame Fitness Equipment shows E-7 error?
- H
  hughesjoelAug 1, 2025
  If your Zipro Fitness Equipment displays an E-7 error, it means the cables connecting the console to the bike might be disconnected or improperly connected. To resolve this, disconnect the power source and then disconnect the cables. Reattach the cables and the power source. If the error persists, repeat the process.
J
jasonsheltonAug 5, 2025
What to do if my Zipro Flame Fitness Equipment rocks to the sides?
- K
  Katrina JohnsonAug 5, 2025
  If your Zipro Fitness Equipment rocks to the sides, it could be due to a few reasons. First, ensure the equipment is placed on an even surface and that there are no objects underneath disrupting its balance. Additionally, check that the bases have been assembled correctly and that the caps on the rear base are properly installed and leveled.
S
spetersonAug 9, 2025
What to do if my Zipro Fitness Equipment shows E-4 error?
- J
  Joshua WellsAug 9, 2025
  If your Zipro Fitness Equipment displays an E-4 error, it indicates that the numerical scale was exceeded when entering the user's age, height, or weight. Ensure that the data you provide fits within the acceptable scale when entering user data.
J
Joanna SalinasAug 13, 2025
How to fix Bluetooth connection on Zipro Fitness Equipment?
- G
  gabriel63Aug 14, 2025
  If you are experiencing Bluetooth connectivity issues with your Zipro Fitness Equipment, make sure that Bluetooth is enabled on your mobile device and that you have paired your mobile device with ZIPRO.
C
Calvin EllisAug 18, 2025
What to do if my Zipro Fitness Equipment shows E-1 error?
- B
  Bradley DunnAug 18, 2025
  If your Zipro Fitness Equipment displays an E-1 error, it means the device isn't receiving input while measuring body fat. Ensure that you keep both hands on the pulse sensors during the measurement.
R
ronald90Aug 22, 2025
Why saddle or handlebar sway on my Zipro Flame?
- S
  sarahcoffeyAug 22, 2025
  If the saddle or handlebar on your Zipro Fitness Equipment sway, it's likely because the bolts and knobs of the saddle column or handlebar column haven't been tightened properly. Tighten the bolts and knob to secure them.