EasyManua.ls Logo

Zipro Jogger - Step 4: Safety Key Activation; Step 5: Power Connection; Folding and Unfolding the Treadmill

Zipro Jogger
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
28
EN
Step 4
Insert the safety key (35) in the computer to start
the treadmill operation. The device will not operate without
it.
PLEASE NOTE! The safety key can be used for instantaneous
treadmill stopping in emergency.
For safety reasons it is recommended to attach
the key to your clothes during every workout.
Step 5
Insert the supply cable (38) in the socket in the main frame
(01) as in the figure.
Congratulations! You have assembled the treadmill!
Read the manual carefully before using the treadmill.
FOLDING AND UNFOLDING
PLEASE NOTE! Before you start folding, check if all the bolts are tight and disconnect the power supply
cable.
Folding the device
Raise the handrails (03) to the vertical position.
Unfolding t he device
Release both column folding knobs (22) turning
them anti-clockwise to loosen the column hinge.
Lower the columns (02 L/R) to the horizontal
position until they are aligned with the main frame
(01). Tighten the knobs (22) turning them clockwise
until you feel resistance.

Related product manuals