28
ASSEMBLY MANUAL
CAUTION! Follow the steps below during the assembly and use tools supplied with the product.
Prepare sufficient space for the assembly operation.
It is advisable to assemble the product with another person because of the weight of some elements.
Step 1
Loosen column knobs (22) and set up the right and left
treadmill column as illustrated. Then rotate the knobs
the opposite way and lock the columns in their place.
Take care not to exert excessive force when unfolding /
folding.
Step 2
Lower the computer to the position shown in the figure
and then tighten knobs on both sides to lock it in place.
Step 3
Insert the safety key (35) into the computer to start
the operation of the treadmill. Otherwise, the device will
not work.
CAUTION! The safety key is intended for immediate
emergency stopping. It is advisable to attach the key to
your clothes during every training for safety purposes.
Congratulations! You have assembled the treadmill!
Read the manual carefully before using the treadmill.
To Next Page
Loading...
