To Next PageTo Next Page
Need help?Do you have a question about the ZKTeco BGM1000 Series and is the answer not in the manual?
General| Material | Steel |
|---|---|
| Power Consumption | 150W |
| Protection Grade | IP54 |
| IP Rating | IP54 |
| Barrier Length | 3m, 6m |
| Barrier Arm Material | Aluminum |
| Power Supply | AC220V |
| Control Method | Remote Control |
| Motor Type | Brushless DC motor |
| Communication Interface | RS485 |
Explains conventions for software interface names and menu separation.
Defines symbols used in the manual and their meanings.
Lists important precautions to follow during installation.
Explains the process and requirements for embedding cables.
Details the procedure for installing the boom arm onto the chassis.
Details the wiring diagram for the new control board of the app version.
Explains the connection procedure for an LPR camera.
Explains the connection procedure for a UHF controller.
Details the connection for the loop detector for anti-smash and auto-close functions.
Details the connection for the VR10 Radar Sensor for anti-smash and auto-close.
Explains connections for infrared/photocell detectors for anti-smash functions.
Guides on connecting the device via Wi-Fi using the ZKbarrier APP.
Details the procedure for setting parameters via the mainboard buttons.
Provides a detailed description of each parameter setting and its default values.
Lists common error codes and their corresponding descriptions for troubleshooting.
Explains how to pair and unpair remote controls with the barrier gate.
Details how to set the delay time for automatic boom arm closing.
Provides detailed dimensions of the boom arm mechanism.
Explains how to adjust the horizontal and vertical angles of the boom arm.
Details the procedure for changing the direction of the boom arm.
Explains how to adjust the spring for proper boom arm balance.
