Attach the mounting template sticker to
the wall, and drill holes according to the
mounting paper.
Fix the back plate on the wall using wall
mounting screws.
After passing the wires through the wiring hole and
connecting them to the device, and then attach the
device to the back plate from top to bottom.
Fasten the device to the back plate with
a security screw.
Copyright © 2021 ZKTECO CO., LTD. All rights reserved.
ZKTeco Industrial Park, No. 32, Industrial Road, Tangxia Town, Dongguan, China.
Phone: +86 769 - 82109991 Fax: +86 755 - 89602394
ZKTECO CO.,LTD. www.zkteco.com
MB20-VL Installation Guide
1.1m
Baseline
How to install the device?
1 2
3
4
Version: 1.0
To Next Page
Need help?
General
