Need help?Do you have a question about the ZLAN 1043 and is the answer not in the manual?
General| Brand | ZLAN |
|---|---|
| Model | 1043 |
| Category | Control Unit |
| Language | English |
Overview of the ZLAN1003 series chips for IoT and their basic function.
Illustrates the internal architecture and connections of the ZLAN1003 chip.
Details the hardware and software capabilities of the ZLAN1003 series.
Highlights the key benefits and selling points of the ZLAN1003 series.
Table comparing different ZLAN models and their functions.
Lists various industries and use cases for ZLAN1003.
Details the pinout and function of each pin on the ZLAN1003 chip.
Discusses the design using RJ45 connectors with integrated network transformers.
Covers designs using RJ45 connectors without integrated network transformers.
Explains how to configure the chip for different operating speeds.
Details the use of the internal voltage regulator for power supply.
Provides methods for minimizing the device's power usage.
Offers guidelines for optimal PCB layout and wiring.
Instructions for installing the necessary ZLVircom software.
Guides users through setting up device parameters using ZLVircom.
Describes how to test TCP connections for communication.
Guides on testing virtual serial port functionality.
Instructions for testing Modbus TCP communication.
Explains how to configure the device via its web interface.
Explains how to use the virtual serial port mode for communication.
Describes direct TCP/IP communication without virtual serial ports.
Details the configuration for the TCP client mode.
How to configure the device to connect to multiple servers simultaneously.
Details the configuration for the TCP server mode.
Configuration for using the device as both a client and a server.
Explains the UDP communication mode configuration.
Guides on configuring devices for direct pair connections.
Steps for establishing the physical network connection.
Details how to establish and verify TCP network connections.
Explains how to monitor and verify data transfer.
How to use ZLVircom for remote monitoring of data.
Steps to enable and configure the Modbus Gateway function.
Details the Modbus Gateway with data storage capabilities.
How to turn off the data storage feature for Modbus Gateway.
Explains the functionality allowing multiple hosts to access the serial device.
Configuration settings for the multi-host function.
Defines and explains the purpose of register packets.
Explains the function and use of heartbeat packets.
Method for sending MAC address for device identification.
Details the Realcom protocol for register and heartbeat packets.
How to define custom formats for register packages.
Describes the automatic heartbeat function.
How to configure custom heartbeat packets.
Steps to enable and configure the transcoding function.
Discusses various application scenarios for transcoding.
Important considerations and caveats regarding transcoding.
To Next Page
