Need help?Do you have a question about the ZLAN 5143D and is the answer not in the manual?
General| Ethernet Ports | 1 |
|---|---|
| RS232 Ports | 1 |
| RS485 Ports | 1 |
| Interface | Ethernet, RS232, RS485 |
| Operating Temperature | -40°C to 85°C |
Details the physical and electrical specifications of the device.
Outlines the core software functionalities supported by the device.
Covers sophisticated software capabilities like Modbus gateway and MQTT.
Initial instructions related to the physical installation and connection of hardware.
Step-by-step guide for physically connecting the device's hardware components.
Instructions for installing the ZLVircom software needed for configuration.
Explains how to configure the device's settings using ZLVircom.
Demonstrates testing the TCP connection and data transfer.
Guides on testing the virtual serial port functionality for communication.
Details how to perform tests for Modbus TCP communication.
Instructions for configuring the device through its web interface.
Details how to use the device in virtual serial port mode for communication.
Covers direct network communication using TCP/IP without virtual serial ports.
Configuration and usage guide for the device operating as a TCP client.
Configuration and usage guide for the device operating as a TCP server.
Configuration and operational details for the UDP communication mode.
Describes a mode for direct device-to-device network pairing.
Steps for establishing and troubleshooting TCP network connections.
How to monitor and verify data transmission between devices.
Using ZLVircom software for real-time remote data monitoring.
Instructions on activating and setting up the Modbus gateway feature.
Details on the Modbus gateway's register storage capability for performance.
Enables multiple hosts to access the serial bus simultaneously.
Configuration for using Modbus with multiple destination IP addresses.
Configuration of registration packets for device identification and cloud communication.
Method to send MAC addresses for unique device identification.
Utilizing the Realcom protocol for device registry and heartbeat functions.
Setting up custom registry formats for device identification.
Configuring and understanding heartbeat packets for link status detection.
Customizing heartbeat packet content for specific communication needs.
Steps to enable and configure the protocol transcoding feature.
Examples of implementing transcoding for protocol conversion.
Method for automatically discovering and searching for devices on the network.
Procedures for manually adding devices to ZLVircom if auto-search fails.
Managing devices that are configured to operate as TCP clients.
To Next Page
