32
Operating Instructions
Control Panel
1. Start/Cancel
Open the door to select the desired cycle and options, touch the Start/
Cancel button and close the door within 4 seconds to start the cycle or begin the
delay countdown. To cancel and reset the program during the cycle, open the door,
and touch Start/Cancel for 3 seconds. Close the door and dishwasher will start a 60
second drain.
2. Wash Cycle Selections
P - Program Buttons
Touch to select the program, corresponding indicator will be lightened.
H - Heavy
This cycle is for hard-to-clean, heavily soiled dishes, pots, pans, and
dishes.
N - Normal
This is the standard program. It is for regularly soiled dinner dishes or
silverware.
E - ECO
It is suitable to clean normally soiled tableware and it is the most efficient
program in terms of its combined energy and water consumption for that
type of tableware.
G - Glass
For lightly soiled loads, such as glasses, crystal, and fine china.
R - Rapid
A shorter wash for lightly soiled loads that do not need drying.
R - Rinse
Use for rinsing dishes, glasses, and silverware that will not be washed
right away.
1
2
3 4 5 6
To Next Page
Loading...
