8
Before installing baffle filters, make sure that you insert the clear, plastic grease cup
under the motor blower.
Step 8
Install the two part chimneys on top of the hood. Slide the inside section up until the
vertical vent slots are visible, attach top portion to mounting bracket with screws.
Secure lower chimney portion to the hood with screws provided.
Figure 7
Step 9
Install the grease cup by sliding into brackets located at the bottom of the motor.
Install baffle channel and baffle filters. Not all models include baffle channels.
Figure 8
Wall Range Hood Installation
Figure 7
Figure 8
To Next Page
Loading...
Need help?
General
