6
Water Pressure
ATTENTION
If the product is damaged and if you see gas leak, please keep away
from the gas. It may cause frostbite when it gets into contact with the skin
(including R600a).
ATTENTION
The type of gas used in the product is stated on the unit's label, which is located
on the left wall inside the refrigerator.
WARNING
Never throw the product into fire for disposal.
WATER PRESSURE PRECAUTIONS
• The operating pressure for the cold water inlet must be between 25 and 80 psi (1.7
and 5.5 Bars). If the water pressure exceeds 80 psi (5.5 Bars), install a pressure-limiting
device or water pressure protector to the inlet valve.
• Never install or operate the appliance if it's possible for the water pressure to exceed 120
psi (8.3 Bars).
• If the water pressure is lower than 14.5 psi (1 Bar), you can use an auxiliary pump to
compensate.
• Make sure there is no water leakage when making the water connections. Otherwise,
there will be water on the floor and the cabinets may get damaged.
• Do not install the unit on the hot water inlet.
• If you do not know how to check the water pressure, please consult a professional plumber.
IMPORTANT SAFETY INSTRUCTIONS
To Next Page
Loading...
