Zline RBIV Series - Page 17

12
Keys and Controls
On/Off Button
• Serves to turn the appliance On and Off. Press the button to switch on the product — the product
will be switched on in 5 seconds. Press the On/Off button for 1.5 seconds to switch off.
Function Election / Child Lock Button
• The child lock is a feature for preventing children from changing the product settings. By pressing
the MENU button for 3 seconds, you may lock/unlock the control panel.
• The lock symbol will illuminate on the display when this function is enabled.
Refrigerator Compartment Temperature Adjustment Button
• Press the REF TEMP button to adjust the temperature between 36 °F (2 °C) to 46 °F (8 °C).
• Super Cool function will be enabled if button is pressed below 36 °F (2 °C). When the cool
symbol illuminates in the upper temperature display, the Super Cool function will be enabled and
the refrigerator will quick cool to 35 °F (1 °C).
• The best temperature for refrigerator compartment is 39 °F (4 °C).
Flex Drawer Temperature Adjustment Button
• Press the SPE TEMP button to change the flex drawer temperature between 30 °F (-1 °C) and
41 °F (5 °C).
Freezer Compartment Adjustment Button
• Press the FRE TEMP button to change the freezer compartment temperature between 5 °F (-15
°C) to -11 °F (-24 °C).
• Super Freeze function will be enabled if the button is pressed below -11 °F (-24 °C).
• When the snow symbol illuminates in the lower temperature display, the Super Freeze function will
be enabled and the refrigerator will quick freeze to -12 °F (-24.5 °C).
"OF" is displaying on the control panel in the REF TEMP and SPE TEMP zones
• This is common when first activating the appliance or when performing a hard reset. "OF" simply
means each temperature zone is turned off. When each zone is turned on, the current temperature
will display and can be changed as outlined above.
• To turn the Refrigerator Compartment on, press and hold REF TEMP for roughly 3 seconds.
• To turn the Flex Drawer on, press and hold SPE TEMP for roughly 3 seconds
• You can turn both zones off in the same manner by pressing and holding each button for roughly
3 seconds until "OF" displays in REF TEMP and SPE TEMP zones.
OPERATION