18
cleaning your cooktop
Before using the product for the first time, clean the top to protect and make cleanups
easier. Daily use of a ceramic glass cleaner will keep the cooktop looking new with
every use.
• Use a ceramic glass cleaner when the cooktop is cool
• Apply a few drops directly to the cooktop and use a paper tower or a soft cleaning
pad.
• Use a dry cloth or paper towel to remove all cleaning residue.
NEVER RUN THE COOKTOP UNDER WATER
CLEANING BURNED RESIDUE
• Use a ceramic glass cleaner when the cooktop is cool
• Spread a few drops on the burned residue area.
• Use a ceramic glass cleaning pad, rub the residue with pressure as needed.
• Repeat the steps above if any residue remains
CLEANING HEAVILY BURNED RESIDUE
• Use a ceramic glass cleaner when the cooktop is cool
• Use a single-edge razor blade scraper approximately at a 45˚ angle against the
glass surface, and scrape off the residue.
• After scraping the residue, spread a few drops on the burned residue area and
finish off with a ceramic glass cleaner and paper towel.
METAL MARKS AND SCRATCHES
• For preventative measures, be careful not to slide pots or pans across the cooktop
surface. This will leave metal marks. These metal marks are removable using a
ceramic glass cleaner with a cleaning pad.
• If pots with a thin overlay of aluminum or copper boil dry, the overlay may leave a
black discoloration on the cooktop. This must be removed immediately before using
the cooktop or the discoloration will become permanent.
If cracks or indentations in the glass surface occurs, the cooktop will
have to be replaced. Contact us at 1-614-777-5004 for assistance.
WARNING
To Next Page
Loading...
General