21
installation instructions
BEFORE INSTALLING THE COOKTOP
1. Visually inspect the cooktop for damage. Make sure all cooktop screw are on tight.
2. Record the model and serial number as found on the bottom part of your cooktop. When
ordering for parts or making inquiries about your cooktop, be sure to include these
numbers from the serial plate.
3. Cutout dimensions of the countertop.
4. Make sure the wall coverings, countertop, and cabinets around the cooktop can
withstand heat (up to 200˚F) generated by the cooktop.
5. Gently lower the cooktop into the countertop cutout.
6. NOTE: Do not seal the cooktop to the countertop. The cooktop must be removable if
service is necessary. Instead, use foam tape to ensure that the cooktop is secure.
IMPORTANT SAFETY INFORMATION
WARNING: Installation and service must be performed by a qualified
installer or service technician.
WARNING: Always read and obey all safety information, failure to
follow these instructions can be killed or seriously injured.
WARNING
To Next Page
Loading...
General