ZLT X100 PRO - Page 3

Figure 1 Interface Diagram
Interface
Type
Definition
Description
DC
Power
connector
Used to connect the matching power
adapter.
RST
Reset
button
Used to reset the device to factory
settings. working on equipment
In this state: press and hold for 6
seconds, the device will restore the
factory settings.
TYPE-C
Debug
interface
Used for device debug log output.
LAN
LAN port
It is used to connect to the network
port of a computer or other
equipment.
SIM Card
SIM card
interface
Used to insert SIM card.
TEL
Telephone
interface
Connect to the phone for call function