- 3 -
It is recommended to set the digital volume controller at the level of increased or maximum
volume and to change the required volume by using the controller VOLUME (9).
Equalizer (in USB/SD/bLUE)
During the playing of MP3 records you can use the remote control button [EQ] to switch the
equalizer modes: Eq 0 - Eq 5.
For the best possible sound, appropriate equalizer mode must be selected for the style of
each track.
MP3 le playback:
1. Place USB ash memory or SD memory card with MP3 records in the respective port.
If USB ash memory or SD memory card is placed or removed from sound system that is
switched on, damage to information and/or device is possible!
2. Switch on the sound system by using the switch POWER (25). Playback of MP3 record will
start.
- If another mode has been used previously ("AUH", "bLUE", FM radio), push the key [INPUT]
(10) or [MODE] on the remote), choose MP3 mode ("USB" or "SD" on display).
- Switch on or cancel the playback pause mode with the key [ / AUTO] (14).
- Selection of the next or previous track:
"Fast forward" by temporarily pressing the key [ / VOL+] (13).
"Rewind" by temporarily pressing the key [ / VOL-] (15) .
Key [REPEAT] – selection of playback type (in MP3 mode):
"ONE REPLAY" – repeated playback of one composition
"ALL" - playback of all compositions.
Key [10+] – selection of the MP3 composition by step +10.
3. After listening to the records, press key [ / AUTO] (14).
4. By switching POWER (25) to status OFF, turn off the sound system.
Playback of analogous signal from external source:
1. Insert pins of the included cable into the sockets AUX INPUT (20), insert the other cable pin
into the audio output of the audio signal source (for example, smartphone, tablet, MP3/MP4
player etc.) or headphone socket.
2. Switch on the sound system and by key [INPUT] (or remote key [MODE]) select mode "AUH".
3. Adjust the volume.
Bluetooth wireless connection:
• Bluetooth is a technology that use wireless radio-wave connection to connect devices.
Effective wireless operational distance is approximately up to 10 meters.
• Full functionality may not be guaranteed taking into account the variety of device
manufacturers, models and software versions.
1. Pairing of devices by using NFC function
• Devices may be instantly paired by using NFC function.
• Not all Bluetooth devices are equipped with NFC function.
a. Use the switch POWER (25) to turn on the sound system. By pressing key [INPUT] or
remote [MODE] choose mode "bLUE".
b. Make sure that Bluetooth and NFC functions have been activated in your Bluetooth
device (for example, smartphone). In order to do this, read your Bluetooth device user's
manual.
c. Move your Bluetooth device very slowly over the sound system NFC symbol ( ) until
you hear signal and the Bluetooth device receives conrming message.
To Next Page
Loading...