Do you have a question about the Zodiac CADET SOLID 285 and is the answer not in the manual?
Overall length | 2.85 m |
---|---|
Maximum persons | 4 |
Total weight | 38 kg |
Shaft length | Short |
Number of air chambers | 3 |
Floor type | Solid |
Length | 2.85 m |
Weight | 38 kg |
Material | PVC |
Air Chambers | 3 |
Capacity | 480 kg |
Instructions to inventory all boat elements and identify them correctly.
Step-by-step guide for assembling the boat, including floor and stringer installation.
Description of the foot pump components and its operation for inflation.
Instructions on activating standard valves for inflation and deflation.
Explains how to change the position of 'Easy-Push' valves for inflation or deflation.
Guide on inflating the main buoyancy tube, ensuring equal pressure across compartments.
Instructions for inflating the keel on the Cadet Solid model after floor assembly.
Explains how temperature changes can affect pressure and the need for re-inflation.
Details the dangers of over-inflation due to temperature and how to deflate.
Procedures for safely reducing pressure from standard and semi-recessed valves.
Visual guide on how to assemble and attach the oars to the boat.
Instructions for installing the removable seat, noting exceptions for specific models.
Detailed steps on how to properly fold and pack the boat into its storage bag.
Technical dimensions of various CADET models, including length, width, and height.
Information on passenger capacity, maximum payload (kg/lb) for different models.
Recommended outboard motor power (CV/kW) and weight limits for each boat model.
Packed dimensions (length, width, height) of the boat for storage and transport.
Notes that indicated dimensions have a tolerance of +/- 3%.
Guidance on selecting engine power based on intended use (fishing vs. water-skiing).
Glossary of boat parts and components with multi-language translations.
Diagrams illustrating the layout and numbered parts for CADET SOLID and CADET ROLL UP models.