Need help?Do you have a question about the Zodiac CADET ROLL UP 200 and is the answer not in the manual?
Lists CADET ROLL UP boat models 200, 240, and 260.
Lists CADET SOLID boat models 260, 285, 310, and 340.
Lists main sections and their starting pages.
Introduces the general approach to boat assembly.
Introduces the components and functions of the inflation system.
Sequential instructions for assembling the boat.
Guidance on checking unpacked items against the inventory.
Detailed steps for fitting the plywood floor sections.
Instructions for installing stringers to reinforce the structure.
How to insert slats into the boat's pockets.
How to install the rollable floor.
Explanation of the foot pump's components and use.
How to operate standard and easy-push valves for inflation/deflation.
Initial steps for connecting the pump and inflating.
Technique for inflating main compartments evenly.
Specific instructions for inflating the keel on solid models.
Specifies the correct pressure for tubes and keel.
How ambient temperature affects boat pressure.
Explains risks associated with incorrect pressure levels.
Steps to take when the boat is overinflated.
Instructions for assembling and installing the oars.
Guidance on installing the seat before full inflation.
Steps for deflating, cleaning, and drying the boat.
How to fold the boat and stow it in the carry bag.
Detailed dimensions for all boat models.
Information on passenger capacity and maximum load.
Recommended engine power specifications.
Dimensions of the boat when packed for transport.
Notes on acceptable variations in dimensions.
Recommendations for operating with maximum payload.
Guidance on choosing appropriate engine power for different uses.
Lists boat components with their English terminology.
Provides component names in French, Italian, German, and Spanish.
Diagram showing the placement of parts on the SOLID model.
Diagram showing the placement of parts on the ROLL UP model.
To Next Page
General