Need help?Do you have a question about the Zodiac CYBERNAUT NT and is the answer not in the manual?
Explains the cleaner's movement system and its patented "IS Track System" gear transmission.
Covers pre-programmed, remotely controlled, and custom cleaning options.
Details how to program the cleaner using the control box and timer options.
Explains the initial one-time programming for pool parameters and duration.
Critical safety warning to disconnect power before maintenance.
Lists error codes (EE codes) and their corresponding problems and solutions.
Explains the cleaner's movement system and its patented "IS Track System" gear transmission.
Covers pre-programmed, remotely controlled, and custom cleaning options.
Details how to program the cleaner using the control box and timer options.
Explains the initial one-time programming for pool parameters and duration.
Critical safety warning to disconnect power before maintenance.
Lists error codes (EE codes) and their corresponding problems and solutions.
Power| control box supply voltage | 230 V 50 Hz |
|---|---|
| robot supply voltage | 30 VDC |
| installed load | 120 W |
Filtration| filtering surface | 3400 cm2 |
|---|---|
| filtration capacity | 20 microns |
Performance| theoretical width cleaned | 430 mm |
|---|---|
| theoretical area cleaned | 260 m2 / h |
| pump output | 20 m3 / h |
| rate | 10 m / min |
Weight and Dimensions| length of cable | 17.5 m |
|---|---|
| robot size | 46x40x28 cm |
| pack size | 58 x 58 x 59 cm |
| weight of robot | 9.1 kg |
| packed weight | 21 kg |
To Next Page
