7
IMPORTANT
Your hose is now free of air. Please ensure that the hose
ends are k
ept under water while performing the following
steps. This will prevent air from entering your system.
1. Begin by removing your
vacuum plate (if you have one)
and skimmer basket from the
skimmer.
2. Slide the hose protector net on
the male end of the hose and
attach the hose connector to
the same end.
3. Fill the hose with water by
placing the end over a return
jet inlet.
HOSE
HOSE
PROTECTOR
NET
HOSE
CONNECTOR
VACUUM
PLATE
SKIMMER
BASKET
To Next Page
Loading...
