What to do if my Zodiac Swimming Pool Vacuum doesn't move?
If your Zodiac Swimming Pool Vacuum is not moving, ensure proper flow using Pool Pulse. Clean the baskets and filter. Inspect the diaphragm for any damage. Also, check the hose sections for leaks by lifting each section above the water.
What to do if my Zodiac Baracuda G3 Swimming Pool Vacuum stops and starts?
If your Zodiac Swimming Pool Vacuum is stopping and starting, check the diaphragm for any blockages or damage. Use Pool Pulse to determine if the flow is proper.
What to do if Zodiac Baracuda G3 Swimming Pool Vacuum gets stuck at steps?
If your Zodiac Swimming Pool Vacuum is getting stuck at the steps, utilize return flow (see adjustments). Confirm that the hose length is correct. Adjust the flow to the cleaner and adjust the hose weight. Consider installing a wheel deflector.
What to do if my Zodiac Baracuda G3 Swimming Pool Vacuum gets stuck under the ladder?
If your Zodiac Swimming Pool Vacuum is getting stuck under the ladder, install a ladder guard (#W24000).
What to do if my Zodiac Swimming Pool Vacuum is patterning?
If your Zodiac Swimming Pool Vacuum is patterning, add return diverters or divert the return inlets downward. Lay the hose in a straight line in the sun to relax its memory. Confirm that the hose length is correct; add one to two hose sections if needed.
What to do if my Zodiac Baracuda G3 won't leave the edge or rim of the pool?
If your Zodiac Swimming Pool Vacuum won't leave the edge or rim of the pool, use Pool Pulse to lower the flow. Utilize the return flow to move the cleaner. Adjust the hose weight as needed.
Why Zodiac Baracuda G3 isn't covering opposite end of pool?
If your Zodiac Swimming Pool Vacuum isn't covering the opposite end of the pool, add return diverters or divert return inlets downward. Use the flow to move the cleaner to the opposite end. Move the hose weight slightly away from the cleaner head. In deep pools, add additional weight.
Why Zodiac Swimming Pool Vacuum coverage will be limited with solar blanket installation?
Coverage will be limited due to blanket.
What to do if my Zodiac Baracuda G3 Swimming Pool Vacuum flips over?
Contact tech services for local warranty station.
General| Pool Type | In-ground |
|---|---|
| FlowKeeper Valve | Yes |
| Wheel Deflector | Yes |
| Cleaning Cycle | 2-3 hours |
| Power Source | Pool filtration system |
| Type | Suction-side pool cleaner |
| Pool Surface Compatibility | Concrete, Tile, Vinyl, Fiberglass |
| Cleaning Coverage | Floor and walls |
| Warranty | 1 Year |
Details specific conditions and situations not covered by the limited warranty.
Instructions for attaching the finned disc to the cleaner's footpad.
Explanation of the Flowkeeper valve's function and adjustment for regulating water flow.
Guidance on assembling hose sections based on pool corner or center connections.
Instructions for balancing the hose using a hose weight for optimal cleaner performance.
Connects cleaner to single/dual skimmers and wall vacuum fittings.
Steps applicable to all installation types, including filling the hose with water.
Completing the physical connection of the cleaner to pool fittings.
Using the Pool Pulse for final flow adjustment in dual skimmer/wall vacuum setups.
How to adjust cleaner balance using hose weights in deeper pools.
Using return line pressure to influence cleaning coverage and guide the cleaner.
Ensuring filter, skimmer, and pump baskets are cleaned regularly for optimal performance.
Proper method for storing the hose to prevent coiling and damage.
Instructions for removing the cleaner during super chlorination or chemical additions.
Guidance on inspecting and replacing worn footpads and discs.
Steps for checking the diaphragm for damage or blockages and rinsing it.
Procedure for correctly reassembling the cassette after maintenance.
Diagnosing and resolving issues with the cleaner's intermittent operation.
Solutions for the cleaner not covering the entire pool or specific areas.
Troubleshooting why the cleaner is stuck, flips over, or doesn't move correctly.
Addressing problems with the cleaner not climbing pool walls, especially in vinyl pools.
To Next Page
