Why does my Zodiac Swimming Pool Vacuum keep stopping and starting?
To address a Zodiac Swimming Pool Vacuum that stops and starts, begin by inspecting the diaphragm for any blockages or damage. Use Pool Pulse® to ensure the flow is correct. Also, check the hoses for any leaks.
How to make Zodiac Swimming Pool Vacuum cover the entire pool?
If your Zodiac Swimming Pool Vacuum isn’t covering the opposite end of the pool, try adding return diverters or diverting the return inlets downward. You can also use the flow to guide the cleaner towards the opposite end. Ensure there is enough hose; add more if needed.
What to do if my Zodiac G2 Swimming Pool Vacuum climbs walls too much?
If your Zodiac Swimming Pool Vacuum climbs walls excessively, use Pool Pulse® to ensure the flow is correct. Make sure the AD Flow Valve is on setting #1. You might also need to reduce the flow to the cleaner head.
How to fix Zodiac G2 Swimming Pool Vacuum patterning?
If your Zodiac Swimming Pool Vacuum is patterning, add return diverters or divert return inlets downward. Lay the hose in a straight line in the sun to relax its memory. Check that the hose length is correct, and add one or two extra hose sections if necessary.
Why won’t my Zodiac G2 climb the walls?
If your Zodiac Swimming Pool Vacuum won’t climb walls, especially in vinyl-lined pools, use Pool Pulse® and increase the flow to high setting #3. Verify that the hose length is correct. Adjust the hose weight so that it is farther from the cleaner head.
What to do if Zodiac G2 flips over?
If your Zodiac Swimming Pool Vacuum flips over, use Pool Pulse® to ensure the flow is correct. Also, check the swivel on the cleaner to make sure it isn't jammed with grit or sand.
Why Zodiac Swimming Pool Vacuum won’t leave the edge of the pool?
If your Zodiac Swimming Pool Vacuum won’t leave the edge or rim of the pool, use Pool Pulse® and lower the flow to the low setting #1. Utilize the return flow to move the cleaner. Adjust the hose weight as needed.
Steps to prepare pool and filtration system before installing the cleaner.
Instructions for fitting the Quick Release Cassette System and Deflector Wheel.
Guides on connecting hoses, fitting hose weight, and protector.
Steps to unscrew and detach the cassette system from the cleaner.
Instructions for separating the diaphragm from the extension pipe.
Method to reset the diaphragm for optimal performance.
General| Pool Type | In-ground |
|---|---|
| Debris Type | Small to medium |
| Warranty | 1 year |
| Power Source | Filtration System |
| Cleaning Coverage | Floor and walls |
| Pool Size | Up to 40 feet |
To Next Page
