To Next PageTo Next Page
Need help?Do you have a question about the Zodiac PX25 and is the answer not in the manual?
General| Category | Heat Pump |
|---|---|
| HSPF Rating | Up to 9.5 |
| Heating Capacity | 25, 000 BTU |
| Refrigerant Type | R410A |
| Voltage | 208/230V |
| Phase | Single |
| Model | Zodiac PX25 |
Appliance purpose, user capabilities, and supervision requirements.
Compliance with standards and local/national rules for installation.
RCD, disconnection device, and power cord replacement guidelines.
Flammability, environmental impact, leak tests, installation, and storage.
Requirements for qualified staff and checks during service.
Steps for working on the cooling circuit, including temperature/pressure risks.
Safety checks before work to minimize ignition risks.
Controlled work procedures and necessary area ventilation.
Availability of fire extinguishers and elimination of ignition sources.
EU compliance statement for radio equipment.
Requirements for outdoor placement and distance from pool edge.
Placement on a stable surface using anti-vibration feet.
Required clearances around the appliance.
Connecting condensate drainage pipes to the appliance.
Precautions for power disconnection and qualified personnel.
Steps for accessing and connecting the power supply.
Connections for single and tri-phase power supplies.
Specific connections for the heating priority feature.
Cable diameter and thermal protection for different models.
Overview of the control panel display, time, and operational icons.
Descriptions of ECOSILENCE, SMART, and BOOST modes.
Detailed functions of modes for heating and cooling operations.
Procedure to lock and unlock the control keypad.
How to set the clock and adjust the desired water temperature.
Steps to choose between BOOST, SMART, ECOSILENCE, and AUTO modes.
Process for safely stopping the heat pump compressor.
Steps for opening and managing the hydraulic circuit.
Post-hydraulic setup tasks including clock and mode setting.
Using a smartphone or tablet for remote operation.
Necessary Wi-Fi conditions for app connectivity.
Step-by-step guide to connect the heat pump to the Fluidra Pool app.
Detailed steps for preparing the appliance for winter.
Reasons for winterising and proper use of the cover.
Procedures for cleaning ventilation and evaporator.
Warnings on cleaning methods and suitable products.
Safety measure of disconnecting power before work.
Recommended Wi-Fi deactivation during troubleshooting.
Importance and frequency of professional servicing.
Diagnosing common operational issues.
Causes and solutions for heating performance problems.
Identifying reasons for circuit breaker trips.
Power consumption and COP for various models.
Operating temperature, pressure, and power supply details.
Admissible operating ranges and voltage variations.
Details on connections, refrigerant type, and protection rating.
Nominal/max power and minimum cable section per model.
Sound pressure, power, and recommended water flow rates.
Refrigerant fluid load and approximate appliance weight.
Table listing physical dimensions (A-G) for each model.
