Need help?Do you have a question about the Zodiac Vortex RV 5400 and is the answer not in the manual?
Explains the cyclonic suction system and its benefits for debris suspension and suction power.
Details the cleaner's three motors: two traction motors and one suction pump motor, plus tilt sensor.
Covers easy access, large 5L capacity, and filtration levels for the cleaner's filter system.
Details safety features like timer system, out-of-water detection, and electronic motor protection.
Explains cleaning options for surface (bottom, sides, water line), shape, and intensity (low/intensive).
Guides on making a safe electrical connection, ensuring the connector's ring is fully tightened.
Explains default cleaning cycles and how to change them or start a cleaning program.
Details the 'Lift System' for short press removal when cleaner is opposite the required side.
Details the 'Lift System' for long press removal when cleaner is not opposite the required side.
Details filter cleaning, replacement intervals (every 2 years), and user alerts for maintenance.
Instructions on checking and cleaning the propeller to ensure no debris is blocking it.
Guides on replacing brushes, noting wear indicators and the recommended replacement interval.
Guides users on interpreting LED flashing or error codes for initial troubleshooting steps.
General| Type | Robotic |
|---|---|
| Filter Type | Fine mesh filter bag |
| Pool Type | In-ground |
| Power Source | Electric |
| Warranty | 2 years |
| Cleaning Coverage | Floor, Walls, Waterline |
| Cleaning Cycle(s) | 2.5 hours |
| Cleaning Area | Up to 40 feet |
| Pool Size | Up to 40 feet |
| Pool Surface | All |
To Next Page
