What to do if the Zodiac Ultrasonic Jewelry Cleaner control box does not respond?
If your Zodiac Ultrasonic Jewelry Cleaner control box isn't responding, try unplugging the power cord from the mains socket, waiting 10 seconds, and then plugging it back in.
How to fix if part of the pool is not correctly cleaned by Zodiac Ultrasonic Jewelry Cleaner?
To address this issue with your Zodiac Ultrasonic Jewelry Cleaner, repeat the immersion steps, and try different locations in the pool until you find the right spot.
Why Zodiac Ultrasonic Jewelry Cleaner does not climb pool sides?
If your Zodiac Ultrasonic Jewelry Cleaner isn't climbing the pool sides as well as it used to, it could be due to several reasons. The filter might be full or clogged, so try cleaning it with fresh water. If it's severely blocked, use an acid solution like spirit vinegar. Replace the filter if necessary. Also, check if the tires are worn and replace them if needed. Microscopic algae may be present, requiring shock chlorination and a slight reduction in pH, but remove the appliance during shock treatment. Finally, inspect the brushes for wear and replace them if necessary.
How to stop Zodiac Ultrasonic Jewelry Cleaner cable from tangling?
To prevent the Zodiac Ultrasonic Jewelry Cleaner cable from tangling, avoid unrolling the entire length of the cable into the pool. Place only the necessary length in the pool and spread the rest along the side.
Why Zodiac Ultrasonic Jewelry Cleaner does not stay on pool bottom?
If your Zodiac Ultrasonic Jewelry Cleaner isn't staying firmly on the pool bottom, it might be due to air trapped inside. Repeat the immersion steps to remove any air. Another reason could be a full or clogged filter; clean it with fresh water or an acid solution like spirit vinegar, and replace it if needed. Also, inspect the propeller for damage.
What to do if Zodiac Ultrasonic Jewelry Cleaner does not move?
General| Type | Robotic |
|---|---|
| Pool Type | In-ground |
| Power Supply | Electric |
| Caddy | Yes |
| Remote Control | Yes |
| Power Source | Electric |
| Warranty | 2 years |
| Cleaning Coverage | Floor, walls, and waterline |
| Cleaning Cycle(s) | 2.5 hours |
Explains how debris is held in suspension and the motor is tilted, improving suction power.
Details the traction motors and pump motor, noting the presence of a tilt sensor.
Highlights the extra wide suction inlet for efficient debris collection.
Discusses front and rear driving wheels, and their benefits for movement and adhesion.
Describes easy access, large capacity, and available filtration levels.
Covers standard and reinforced brushing options.
Explains standard and sucker tyre options for different pool surfaces.
Details the comfort, transport, and assembly features of the trolley.
Describes the swivel feature that reduces cable tangling.
Explains the cover's function for weather protection and storage.
Covers timer system, out-of-water safety, and electronic motor protection.
Lists and illustrates all items included in the product package.
Explains the meaning of various control panel and indicator symbols.
Provides detailed specifications like voltage, power, dimensions, and weight.
Identifies key components of the cleaner using lettered labels.
Provides guidelines for optimal placement and distance requirements.
Details the step-by-step process for assembling the cleaner's carriage.
Explains how to securely attach the cleaner to its base.
Describes compatible pool types, shapes, and bottom configurations.
Correlates pool dimensions with required floating cable lengths.
Details surface, shape, and intensity settings for cleaning cycles.
Outlines water quality parameters for best cleaning performance.
Provides instructions to prevent cable entanglement during immersion.
Guides the user on safely connecting the power supply.
Explains default cycles and how to initiate or change them.
Describes the Lift System for easy removal and draining.
Details the functions and usage of the remote control.
Explains how to set up and program cleaning schedules.
Guides on how to modify the duration of cleaning cycles.
Provides steps for filter maintenance and replacement intervals.
Details the procedure for cleaning debris from the propeller.
Explains how to check for wear and replace the brushes.
Guides on how to replace worn or damaged tyres.
Explains how to interpret and respond to device alerts.
Details diagnostic codes and meanings for professional use.
Describes how to access user-level diagnostic information.
Explains access to advanced diagnostics for service professionals.
Outlines quick and full software diagnostic test options.
Troubleshooting steps for issues with climbing pool walls.
Solutions for weak filtration and poor surface adhesion.
Troubleshooting steps for stability issues on the pool floor.
Solutions for problems climbing walls to exit the water.
Tips for resolving issues with remote control reception.
Lists various repair and configuration procedures by code.
To Next Page