EasyManua.ls Logo

Zodiac Vortex 3 4WD User Manual

Zodiac Vortex 3 4WD
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Instructions for installation and use
English
EN
4
3 4WD
Question and Answer IconNeed help?

Do you have a question about the Zodiac Vortex 3 4WD and is the answer not in the manual?

Zodiac Vortex 3 4WD Specifications

General IconGeneral
BrandZodiac
ModelVortex 3 4WD
CategorySwimming Pool Vacuum
LanguageEnglish

Summary

PRECAUTIONS AND ASSEMBLY

IMPORTANT SAFETY INSTRUCTIONS

Essential safety rules for operating the pool cleaner and its control box.

CONTENT OF THE PACKAGE

Lists all items included in the product packaging for user verification.

ASSEMBLING THE CADDY

Step-by-step guide on how to assemble the transport caddy for the cleaner.

USE

RECOMMENDATIONS FOR USE

Guidelines for optimal pool water conditions and cleaner operation.

IMMERSING THE CLEANER

Procedure to properly submerge the cleaner in the pool for effective operation.

ELECTRICAL CONNECTION

Instructions for safely connecting the cleaner's power supply to the control box and outlet.

PROGRAMMING THE CLEANING CYCLES

Details on selecting and setting cleaning programs, including cycle durations.

START-UP AND OPERATION

How to start the cleaner, change programs, and understand operational remarks.

END OF PROGRAM

What happens when a cleaning cycle finishes and how to safely remove the cleaner.

REMOTE CONTROL MODE (VORTEX™4)

How to operate the cleaner manually using the remote control unit.

SYNCHRONISATION PROCEDURE

Steps to pair the remote control unit with the cleaner's control unit.

USAGE WITH AN EXTERNAL TIMER (VORTEX™4)

How to use an external timer to automate the cleaner's operation.

CLEANING AND MAINTENANCE

CLEANING THE FILTER BASKET

Step-by-step instructions for cleaning the filter basket after each use.

CLEANING AND STORING THE CLEANER

How to clean the robot and store it properly for drying and longevity.

RECYCLING THE PRODUCT

Information on how to dispose of the product responsibly at its end of life.

REPLACEMENT OF ACCESSORIES

REPLACING THE BRUSHES

Guide on how to replace worn brushes to maintain cleaning performance.

REPLACING THE TYRES

Instructions for removing and installing new tyres on the cleaner's wheels.

ASSEMBLING THE NEW TYRES

Detailed steps for fitting new tyres onto the wheels, ensuring correct orientation.

TROUBLESHOOTING

CLEANER DOES NOT STAY FIRMLY ON POOL BOTTOM

Addresses issues related to air in the casing affecting the cleaner's grip.

CLEANER DOES NOT CLIMB POOL SIDES

Explains causes like dirty filters or slippery pool sides affecting climbing ability.

CLEANER DOES NOT MOVE ON START-UP

Troubleshooting steps for when the cleaner fails to start moving after being powered on.

INDICATOR LIGHTS FLASH ALTERNATELY

Solutions for error indicators showing control unit or cleaner problems.

FLASHING LIGHTS AFTER START-UP (< 20 SECONDS)

Diagnoses and resolves flashing lights appearing immediately after starting the cleaner.

FLASHING LIGHTS DURING CYCLE

Addresses flashing lights that occur while the cleaner is operating in the pool.

TECHNICAL INFORMATION

WARRANTIES

REGISTRATION ON LINE

CONFORMITY

Related product manuals