H0360600.A2.EN Ver.05/2011 7
2.6.1.Procedureforactivatingthismode
x Connectthecontrolunittothemainpowersupply.
x Ifyouwanttherobottoautomaticallyrunabottomonlycycle,press
+ (morethan3seconds).
x If you want the robot to automatically run a bottom and walls only cycle, press
+ (morethan 3
seconds).
x The2diodeswillflashsimultaneously:
x Thecleanerwillnowstartautomaticallyinconjunctionwiththetimeselected.
2.6.2.Tocanceltheautomatedstartmode
x Connectthecontrolunittothemainpowersupply.Pressthe key(morethan6seconds).
x The2diodeswillflashsimultaneously:
CLEANINGANDMAINTENANCE
3.1.CLEANINGTHEFILTERBASKET
Weadviseyoutocleanthefilteraftereachuse.
x Pressonbutton(Diagram141)onthefilterbasketaccesscover.
x Liftthecover(142)completelyuntilitremainsinaverticalposition.
x Removethefilterbasketholderusingitshandle(143).
x Pressonthefilterholderbutton(144)andpullthefilterbasketapartfrom
itsholder(145).
x Thefilterbasketwillseparatefromtheholder(146).
x Emptythefilterbasketandcleanitusingrunningwater(Diagram147).
x Rinsethefilterbasketandremoveanydebrisstuckinsideit.
x Refit the filter basket and filter holder together and replace back into the
cleaner.
x Closethecoverandmakesurethatitissecure.
3.2.CLEANINGANDSTORINGTHECLEANER
The cleaner must be cleaned regularly using slightly soapy clean water, do not use solvents such a
trichloroethyleneoritsequivalent.Rinsethecleanerthoroughlyusingcleanwater.Donotletyourcleanerdry
indirectsunlightnearthepool.
Thecleanermustbestoredonitsowncaddy,sothatitdriesquickly.
Make sure the power supply cable is disconnected from the power outlet or that the floating cable is
disconnectedfromthecontrolbox.
Diagram14
To Next Page
Loading...
