Need help?Do you have a question about the Zodiac Z300 Series and is the answer not in the manual?
Instructions for physically mounting the heat pump on a stable, level surface.
Covers voltage requirements, protection, cable sizing, and connection options for safe electrical setup.
Step-by-step guide for powering on and initiating the heat pump's operation.
General servicing recommendations for optimal performance and defect prevention.
Identifies common malfunctions, their possible causes, and recommended solutions.
General| Model | Z300 Series |
|---|---|
| Type | Heat Pump |
| Refrigerant | R410A |
| SEER | Varies by model |
| HSPF | Varies by model |
| Voltage | 208-230V |
| Phase | Single Phase |
To Next Page
