Need help?Do you have a question about the Zoeller ZCS and is the answer not in the manual?
General| Phase | 1 |
|---|---|
| Material | Cast Iron |
| Horsepower | 1/2 |
| Outlet Size | 2" |
| Voltage | 115/230V |
Explains the meaning of important symbols and text formats used in the manual.
Identifies and describes the main components and controls of the Terminal ZCS.
Identifies and describes the main components and controls of the ZCS Command Module.
Describes the primary display interface and its elements.
Details the menu for previewing and managing parameters from an external drive.
Provides an overview of the sensor status and system health.
Explains how to check and reset various operational counters.
Describes how to control the tailgate and pushing wall from the terminal.
Allows adjustment of compaction cycles in automatic mode.
Allows setting press parameters related to the lifter.
Lists parameters that can be adjusted in the video menu.
Explains how to set operating modes for lighting and handle heating.
Describes the process for calibrating the laser sensor.
Provides information on vehicle weight and axle loads.
Explains how to view operating manuals on the terminal.
To Next Page