Zoetis AlphaTrak3 User Manual

Step 3: Insert test strip into meter
Turn the meter on by inserting a test strip with the
arrow on the test strip facing up and pointing to the
meter. Confirm that the code on the meter matches
the species code on the test strip vial. To change the
species, press and hold “c” and at the same time
press “m”.
How to perform a blood glucose test
Find peace of mind knowing you’re providing the best care for your cat or dog with an at-home testing monitor that’s
trusted and used by vets
1
.
• Requires a very small blood sample size (0.3 ul)
• Test strip turns meter on automatically
• Test strips are designed for fast wicking
• Results are ready in seconds
Step 5: Obtain sample
Using the lancing device, extract a small amount
of blood from the selected testing site.
Step 6: Add blood sample to test strip
With the meter, touch front edge of the test strip to the
blood drop until you hear a beep. Moving lines on the
meter display to indicate it is working.
Step 7: Read results
Results appear within 5 seconds. Discard used test
strip and lancet.
Please take care to discard used test strip and lancet in sharps container or biohazard.
Dogs:
Elbow callus
Marginal ear vein
Side of the paw pad
Inside of upper lip
Cats:
Marginal ear vein
Side of the paw pad
Step 4: Select a testing site
Step 2: Prepare lancet
Insert a new lancet into a lancing device, push until it
comes to a complete stop, and replace the white cap.
For more information, please read the AlphaTrak3 Quick
User’s Guide or watch our instructional videos on
alphatrak.com and YouTube.
Adjust lancing device depth by rotating the wheel: 1 is the shallowest, 6 is the deepest.
Step 1: Gather all supplies to perform a test
•
AlphaTrak 3 Meter
•
Lancing device and lancets
•
AlphaTrak 3 Test Strips
•
Optional: Vaseline (to help blood
form droplets)
•
Gauze or tissue
Elbow callus
Side of the paw pad
Marginal ear vein
Inside of upper lip
Before you get started, please follow the AlphaTrak 3 meter setup instructions provided in the Quick User’s Guide.

Zoetis AlphaTrak3 Specifications

General

Brand	Zoetis
Model	AlphaTrak3
Category	Blood Glucose Meter
Language	English

Summary

How to perform a blood glucose test

Step 1: Gather all supplies to perform a test

Collect AlphaTrak 3 meter, lancing device, lancets, test strips, and optional Vaseline or gauze.

Step 2: Prepare lancet

Insert a new lancet into the lancing device, push to stop, and replace the white cap. Adjust depth as needed.

Step 3: Insert test strip into meter

Insert test strip with arrow up, confirm meter species code matches test strip vial code.

Step 4: Select a testing site

Choose a suitable site for dogs (ear callus, marginal ear vein, paw pad, lip) or cats (ear vein, paw pad, lip).

Step 5: Obtain sample

Use the lancing device to extract a small blood sample from the chosen testing site.

Step 6: Add blood sample to test strip

Touch the meter's front edge to the blood drop until a beep is heard, indicating it is working.

Step 7: Read results

Results appear within 5 seconds. Discard used test strip and lancet safely.

Performing a control solution test

Control Solution Test Procedure

Perform test with new strips or for unexpected results. Check expiration dates, insert strip, set species code, select control setting.

Tips for a successful blood glucose test

Testing Site Preparation and Technique

Use same site, prepare location, familiarize pet with lancing device, and warm site if needed for better blood flow.

Lancing Device Setting and Data Management

Start with deepest lancet setting, apply gentle pressure, and consider using the AlphaTrak 3 app for tracking.