12 | Vetscan Hub User’s Manual
Safety Warning Labels
Warning labels posted on the Vetscan Hub and in this manual warn you about potential sources of injury or harm.
Refer to Appendix C: Symbols to review the meaning of each safety warning label.
Use only the provided power supply and cable when connecting the Vetscan Hub.
The Vetscan Hub has been tested and is in compliance with all applicable requirements of the following safety and
electromagnetic standards:
Safety Compliance
• IEC/EN 61010-1:2010+A1:2016/2019 (Third Edition)
• IEC/EN 62368-1:2014/2014+A11:2017; IEC/EN 62368-1:2018/2020+A11:2020
Electromagnetic Compatibility (EMC)
• IEC/EN 61326-1:2020/2021 Electromagnetic compatibility for measurement, control and laboratory equipment
Appendix D: Safety and Regulatory Compliance
Note: If the equipment is used in a manner not specified by the manufacturer, the protection provided
by the equipment may be impaired. The Vetscan Hub shall be used for the intended use only.
To Next Page
Loading...
Need help?
General
