Zojirushi EC-YTC100 - How to Set the Clock; Sound Signals and How to Change Them

H
O
W
TO SET THE CLOCK
e.g.: If the current time is PM1:01 but displays PM12:58.
1
Insert the Power Plug into an electrical outlet.
The cu rren t tim e app ears on th e D isplay.
2 Press the TIME SETTING button ( ▼ )
The tim e d isp lay w ill s ta rt to blink.
Adjusting time
A button: Each press advances the tim e in 1-m inute increments.
▼ button: Each press moves the clock in reverse by 1 minute.
Press and hold either button to quickly adjust in 10-m inute increments.
r
The time display will stop blinking after 5 seconds, indicating the Time Setting is
completed.
If the tim e d is pla y still d oes not sh ow the c urre nt tim e, repeat Ste p 2
to re adjust the tim e.
Time correction is completed
1 If the display show s a blinking “AM 7:00” when the Power Plug is
inserted, the built-in lithium battery is out. You may continue using
the produ ct and readjust the clock each tim e the Power Plug is
plugged in. (To replace the battery -*■ P.19)
Stays on
L
t-n $
..pm » - u I..
SOUND SIGNALS AND HOW TO CHANGE THEM
This product is equipped with a Sound Signal function, which will inform you when brewing has completed.
The product is designed to Beep by default. To change to Mute:
Types of Sound Signals:
'
------- - -------------- _ _ T y
B
rew
ing has starte d. a beep
Tim e r se tting is com plete . a beep
Bre wing is com plete. 5 long beeps
Citric acid cleaning process is completed. 5 long beeps
The Automatic Shut-Off function has been activated.
How to change the Sound Signal:
j Insert the Power Plug into an electrical outlet.
Hold the
CANCEL
1 The selected Sound Signal is stored and will
remain even if the p roduct is unplugged.
button for more than 3 seconds.
Each tim e the CANCEL button is held for more than 3 seconds, the Sound Signal will change.
© Beep:
A short beep means the Beep setting has been selected.
D Mute:
A long beep means the Mute setting has been selected.
1
The setting is completed when the desired Sound Signal is heard.
HOW TO SET THE CLOCK
e.g.: If the current time is PM1 :01 but displays PM12:58.
l Insert the Power Plug into an electrical outlet.
The current time appears on the Display.
2 Press the TIME SETTING button ( )
to set the current time on the Display.
•
A
T to set the current time on the Display.
The time display will start to blink.
A button: Each press advances the time in 1-minute increments.
T button: Each press moves the clock in reverse by 1 minute.
Adjusting time
• Press and hold either button to quickly adjust in 1 a-minute increments.
3 The time display will stop blinking after 5 seconds, indicating the Time Setting is
completed.
If the time display still does not show the current time, repeat Step 2
to readjust
the time.
• If the display shows a blinking "AM?:00" when the Power Plug is
inserted, the built-in lithium battery is out. You may continue using
the product and readjust the clock each time the Power Plug is
plugged in. (To replace the battery-+ P.19)
Time correction is completed
----------------------------- ~
,,,,. ,.n , .....
, .PM f•U f ,
-c..:::._ ___________ __ _
SOUND SIGNALS AND HOW TO CHANGE THEM
This product is equipped with a Sound Signal function, which will inform you when brewing has completed.
The product is designed to Beep by default. To change to Mute:
Types of Sound Signals:
p
e s o
f Sound Signals
In dica tio n
B ee p:
Indication
Types
Beep:
M u te :
Brewing has started.
a
beep
no sound
Timer setting is complete.
a beep
no sound
Brewing is complete. 5 long beeps
no sound
Citric acid cleaning process is completed.
5 long beeps
no sound
The Automatic Shut-Off function has been activated.
10 short beeps
-
How to change the Sound Signal:
1 Insert the Power Plug into an electrical outlet.
2 Hold the I utton for more than 3 seconds.
Mute:
no sound
no sound
no sound
no sound
1 0 short beeps
• The selected Sound Signal is stored and will
remain even if the product is unplugged.
CANCEL I b
Each time the CANCEL button is held for more than 3 seconds , the Sound Signal will change.
G) Beep: J --+ @ Mute:
A short beep means the Beep setting has been selected . A long beep means the Mute setting has been selected .
3 The setting is completed when the desired Sound Signal is heard.
9
of Sound Signals