CLEANING AND MAINTENANCE
Disconnect the power before cleaning. Do not immerse cord, plug,
or housing in any liquid.Allow bread maker to cool down completely
before cleaning.
1.To clean the kneading paddle: If the kneading paddle is difficult to
remove from the bread, add water to the bottom of the bread pan
and allow to soak for up to 1 hour. Wipe the paddle carefully with a
cotton damp cloth. Both the bread pan and kneading paddle are
dish-washing safe components.
2.To clean bread pan: Remove the bread pan by turning it in
counterclockwise, then lift up the handle. Wipe inside and outside of
pan with damp cloth, do not use any sharp or abrasive agents, in
order to protect the non-stick coating. The bread pan must be dried
completely before installation.
Note: The bread pan and kneading paddle are dishwasher-safe.
The outside of the bread pan and base may discolor. This is normal.
3.To clean the housing and top lid: After use, allow unit to cool. Use
a damp cloth to wipe lid, housing ,baking chamber, and interior of
viewing window. Do not use any abrasive cleaners for cleaning,
since this will degrade the high polish of the surface. Never immerse
the housing into water for cleaning.
Note: It is suggested not disassembling the lid for cleaning.
4. Before the bread maker is packed for storage, ensure that it has
To Next Page
Loading...