5
4
Continue to
turn until Super
Tool spins
freely and Pop
loosens
Unscrew
Super Tool
Remove
Quick Pop
Screw Super
Tool onto
the Stick
A B DC
Remove and Enjoy!
When the Quick Pop™ is frozen, place the Super Tool over the
stick and rotate clockwise (fig. A). Keep turning the Super Tool
until the Quick Pop™ loosens from the mold and starts to rise
slightly (fig B). Once the pop is loosened, unscrew the Super
Tool counter-clockwise to remove it from the stick. (fig C). At-
tach the optional drip guard to the stick and lift the Quick Pop™
out of the molds. (fig D).
If the Quick Pop™ Maker is properly frozen and your juice is chilled, the
Quick Pops™ should freeze in 7-9 minutes.* Each additional batch will
take longer to freeze. The Quick Pop™ Maker can make up to 3 pops (3
batches). Multi-layered & core pops will take longer to freeze, and will
reduce the number of batches.* Individual results will vary.
To Next Page
Loading...
