ZOKU Quick Pop Maker - Flavored Core Pop; Uh Oh, My Quick Pop is Stuck!

7
Uh Oh, My Quick Pop is
Stuck!
Don’t sweat it, sometimes it happens.
Here are some simple tips to ensure
effortless pop removal:
1) DO NOT USE BEVERAGES WITH
ARTIFICIAL SWEETENERS such as
sucralose, aspartame, saccharin, etc.
Plain water, carbonated beverages, or
beverages that do not have enough
sugar content may get stuck in the
Quick Pop™ Maker.
2) Make sure the Quick Pop™ Maker is
COMPLETELY DRY before putting it
in the freezer. ANY water that remains
in the Quick Pop™ maker’s molds prior
to freezing it may prevent the Quick
Pops™ from being removed.
3) Do not fill past the fill line. If the
molds are overfilled the pops may be
impossible to remove (see the illustra-
tion on page 4 for fill line indication).
4) Make sure the sticks are in place
BEFORE pouring liquid into the Quick
Pop™ Maker.
5) If a pop is stuck, do not apply ex-
cessive force to the Super Tool or try
Pour the shell flavor (follow steps
1-3, on pages 3-4). Wait until you
see the outer shell freeze (the lon-
ger you wait, the thicker the shell
will be). Remove the unfrozen liquid
from the center of the pop by drink-
ing it with a straw (fig. A) or use the
siphon from the Zoku
®
Tool Kit, sold
separately (fig. B). Next, pour in the
core flavor and wait until it freezes.
Continue with Step 4 (on page 5).
F
I
L
L
L
I
N
E
F
I
L
L
L
I
N
E
A
B
Flavored Core Pop