4
♦ Do not place heavy object on cables or cover
them with rugs or carpet.
♦ Do not place cables where they can be pinched
or stepped on.
♦ Designed as a driving aid. Watching videos,
broadcasts, DVDs and/or any images other
than intended driving assistance cameras is
prohibited.
CAUTION
♦ To avoid damage to electronic circuit, stop
using this product while doing welding work to
the vehicle and/or trailers.
♦ Never immerse any component in water, and
do not employ spray cleaners. When cleaning,
use damp lint-free cloth only.
♦ Connect this unit only to other compatible
devices.
♦ Make sure all cables are connected properly;
improper cable connections may damage the
camera and the monitor.
♦ Make sure all cables are connected firmly.
♦ Cables should not be allowed to touch hot or
rotating parts, such as engine, ventilator, etc.
♦ Do not locate the monitor near heat generating
vents or devices.
♦ Turn off power to the monitor when connecting
the camera.
Monitors are not designed to be waterproof. Exposure
to water, such as rain, may damage the unit.
5
SYSTEM FEATURES
MONITOR
Display Device: 7” CRT
Input Voltage: DC 11~32V
Power Consumption: <=18W
Working Temperature: -15 C°~+60 C°
Image Resolution: >=420 TV Lines
Horizontal / Vertical Sync Resolution: CCIR, 15.625kHz (H) / 50 (V)
EIA, 15.734kHz(H) / 60Hz(V)
Anti-vibration Capability: 6.8G
Dimensions:203mm*153mm*219mm
Weight: 5kg
1 / 3” B/W CCD CAMERA SPECIFICATIONS
TV System: EIA
Effective Pixels: 512 x 492 pixels
Sensing Area: 4.9mm x 3.7mm
Scanning System: 2:1Interlace
Sync. System: Internal
Resolution: 420TV lines
Minimum Illumination: 0 Lux
Horizontal Sync resolution: 15,734KHz
Vertical Sync resolution: 60Hz
Video Output: 1.0vp-p, 75Ohm
Microphone: No
Gamma Consumption: 0.45
AGC: Auto
S/N Ratio: Better than 48dB
White Balance: Auto
Electronic Shutter: 1/60 ~ 1/10,000
BLC: Auto
Current Consumption: Max. 300mA
Power Supply: DC12V
Operating Temperature: -20°C~70°C, RH95% MAX
Storage Temperature: -40°C~85°C RH95% MAX
Lens: f = 2.8
Lens Angle: (Standard 120° may vary based on specifications requested)
To Next Page
Loading...