Zonet ZPS1000 - Installing the Setup Wizard

The PSAdmin is a proprietary Windows based management program that can assist you in
configuring and managing your print server in NetWare environments. The program can be
run from any Windows PC.
Installing the Setup Wizard
To install Wizard, please follow the directions listed below.
1. Insert the Utility CD into your CD-ROM drive.
2. The Autorun program starts and the following window appears. If the setup program
does not start automatically, run Autorun.exe in the root folder from the CD-Rom.
3. Choose Install Setup Utility, the program will install the Setup Wizard into your
computer.
4. After installation completes, the Setup Wizard message appears.
Click on “Network Print Server Setup Wizard” to configure Print Server settings and add
Printer to the PC.
5. Click Network Print Server Setup Wizard and the following message appear.
8